1:  a6088292acf9 =  1:  2dfd46178e4a bcma: core: clear only FORCEHT for BCMA_CLKMODE_DYNAMIC
 2:  796f7c359d0a <  -:  ------------ bcma: pmu: init PLL and resources on BCM4352/BCM4360
 3:  b68912a53b32 <  -:  ------------ bcma: pcie2: request HT on BCM4352/BCM4360
 -:  ------------ >  2:  d058e0deafdf bcma: pmu: init PLL and resources on BCM4352/BCM4360
 -:  ------------ >  3:  963cd369fcf6 bcma: pcie2: request HT on BCM4352/BCM4360
 4:  1efec9261d87 =  4:  e3c8a8ac0006 bcma: chipcommon: enable asynchronous GPIO interrupts
 5:  ace78e47aa23 !  5:  ede7efcb254d bcma: extract SPROM revision 11
    @@ drivers/bcma/sprom.c: static void bcma_sprom_extract_r8(struct bcma_bus *bus, co
     +	     SSB_SPROM8_TEMPDELTA_HYSTERESIS,
     +	     SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
     +
    -+	/* Whole dB in bits [5:0], sign-extended, quarter dB in bits [7:6]. */
    -+	for (i = 0; i < 2; i++) {
    -+		u8 raw = i ? (sprom[SSB_SPROM11_AGBG2A0 / 2] >> 8) & 0xff
    -+			 : sprom[SSB_SPROM11_AGBG10 / 2] & 0xff;
    -+		s8 gain = (s8)((raw & 0x3f) << 2) >> 2;
    -+
    -+		bus->sprom.antenna_gain_qdb[i] = (s8)(4 * gain + (raw >> 6));
    -+	}
    ++	bus->sprom.antenna_gain_qdb[0] =
    ++		ssb_sprom_antgain_qdb(sprom[SPOFF(SSB_SPROM11_AGBG10)] & 0xff);
    ++	bus->sprom.antenna_gain_qdb[1] =
    ++		ssb_sprom_antgain_qdb(sprom[SPOFF(SSB_SPROM11_AGBG2A0)] >> 8);
     +}
     +
      /*
    @@ include/linux/ssb/ssb.h: struct ssb_sprom {
     +	u16 tssifloor5g[4];
      };
      
    ++/*
    ++ * SROM rev 11 antenna gain byte, agbg0 or aga0, in quarter dB: whole dB in
    ++ * bits [5:0], signed, and quarter dB in bits [7:6].
    ++ */
    ++static inline s8 ssb_sprom_antgain_qdb(u8 raw)
    ++{
    ++	s8 gain = (s8)((raw & 0x3f) << 2) >> 2;
    ++
    ++	return 4 * gain + (raw >> 6);
    ++}
    ++
      /* Information about the PCB the circuitry is soldered on. */
    + struct ssb_boardinfo {
    + 	u16 vendor;
     
      ## include/linux/ssb/ssb_regs.h ##
     @@
 -:  ------------ >  6:  7a112defe8d8 firmware: bcm47xx_sprom: read the SPROM revision 11 fields from NVRAM
 6:  a03d620da9d5 !  7:  ae006a8496bc firmware: bcm47xx_sprom: read ledbh4..ledbh15 from NVRAM
    @@ Commit message
         firmware: bcm47xx_sprom: read ledbh4..ledbh15 from NVRAM
     
         Add gpio_ext[] for the LED behaviours of GPIO 4-15 and fill it from
    -    NVRAM ledbh4..ledbh15, both for a SPROM built from NVRAM and, through
    -    the new bcm47xx_sprom_fill_bcma_nvram(), on top of a SPROM read from a
    -    bcma device. The bcma prefix lookup moves into a helper shared by both
    -    paths.
    +    NVRAM ledbh4..ledbh15.
    +
    +    bcm47xx_fill_sprom() is reached only through the SPROM fallback, so the
    +    NVRAM of a bcma device with a SPROM of its own is never read. Add
    +    bcm47xx_sprom_fill_bcma_nvram(), which bcma calls after extracting the
    +    SPROM, to read the variables the SPROM has no word for on top of it.
    +    The bcma prefix lookup moves into a helper shared by both paths.
     
         Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
     
 7:  62b3cd290824 <  -:  ------------ firmware: bcm47xx_sprom: read boardflags3 and AvVmid_c0..2 from NVRAM
 8:  027005b86b3a <  -:  ------------ bcma: add the BCM4352 PCI ID
 -:  ------------ >  8:  c60d50b9d702 firmware: bcm47xx_sprom: read boardflags3 from NVRAM over the SPROM
 -:  ------------ >  9:  7251c29830f0 bcma: add the single-band BCM4352/BCM4360 PCI IDs
 -:  ------------ > 10:  87e50b1c9f63 wifi: b43: add the 2.4 GHz BCM4352/BCM4360 to the supported bands